LXN5O406a
COMBINATION LAMP SWITCH
Tail lamp and dash meter will be lit
when light switch is turned CCW
once. When turned once again, high
beam or lower beam will be lit. For
direction light, bring the lever forward
to light for right and backward to light
for left.
To use horn, press on side of light
switch.
LXN5O407a
4WD SHIFT SWITCH
2WD: Rear wheel drive high range –
This is for driving on dry hard surfac-
es.
4WD AUTO: 4WD Auto range – This
is automatically disengaged when
either brake pedal is pressed or if
speed exceeds 9.3mph(15km/h)
4WD: Four-wheel drive – This range
provides full time four –wheel drive
F/R SHUTTLE LEVER
It is used for shifting between “for-
ward” and “reverse” drive.
LXN5O408a
(1) Combination Lamp Switch (1) F/R Shuttle Lever
To Next Page
Loading...
