Branson K62 - To Stop The Engine; To Stop the Engine; Driving on the Road

5
-
12
BRANSON K SERIES
1. Put the acceleration lever on
LOW, and turn the main switch to
“OFF”.
2. Put shuttle lever, main gearshift
lever and PTO shift lever to “N”.
put PTO ON/OFF switch in to the
“OFF” position and front wheel le-
ver to the “OFF”.
3. Put the hitch control lever on
“DOWN”
TO STOP THE ENGINE
When stopping the engine,
never stop it with the reducer
lever.
After stopping the engine,
make sure to apply the park-
ing brake.
•
•
CAUTION
For warming-up operation,
strongly step on the brake
pedal and pull your parking
brake.
•
NOTE
When leaving the tractor, park
the tractor in a flat and safe
place, put the shuttle lever
and the main shift lever to “N”,
and block the tires.
[Otherwise]
The tractor may move and cause
an accident. Always set the park-
ing brake.
•
WARNING
DRIVING ON THE ROAD
When driving on a road or
crossing a dike, make sure to
connect the brake pedals. Oth-
erwise, the tractor may turn
abruptly or turn over due to
one-sided braking.
Observe the trafc regulations
when driving on the road. Oth-
erwise, you may be involved
in an accident.
•
•
WARNING
LXN5O523A
BRANSON K SERIES 트랙터-영문판-05.indd12 12 2014-09-02 오후 6:39:55