Model 621 User’s Manual USING THE LASER WAVELENGTH METER
Bristol Instruments, Inc. 23
Averaging – This function automatically calculates a running average of as
many as 100 measurements.
When averaging is selected, the Wavelength Display or Trend Screen will display
a single measurement after the chosen number of measurements is collected
and averaged. The Wavelength Display or Trend Screen will then be updated
with each successive measurement.
– Enable/Disable – Averaging can be turned on by clicking Enable. This
changes the menu option to Disable. Averaging is turned off by clicking
Disable.
– Set Number – Allows the user to enter the number of averages between 2
and 100. The number of averages can be adjusted incrementally by using
the up/down arrows or by highlighting the current numeric value and entering
a new numeric value with the keyboard.
Help Menu
Manual - Opens a PDF file of the 621 User’s Manual.
About - Displays the NuView Software version, the embedded software versions,
and information about the 621 system.
To Next Page
Loading...
