© 2022 Brivo Systems LLC. All rights reserved. PUB-Brivo ACS6100 Installation Manual
3
Brivo ACS6100 Installation Manual
MET Labs (MET) Compliance
The B-ACS6000-MBE/MBS control panel complies with the UL 294 Standard for access control units with the
following restrictions:
• The Ethernet port is for supplemental use only. The unit will continue to operate standalone if the
network connection is interrupted.
• The monitoring software is not MET evaluated.
Canada-MET Labs (MET-C) Compliancy (CSA C22.2 No. 205)
For MET-C Listed applications, the unit shall be installed in accordance with Part 1 of the Canadian Electrical Code.
UL294/ULC Listing Compliancy
UL294 Performance Levels
Model
Number
Access Control
Line Security
Level
Destructive
Attack Level
Endurance
Level
Stand-by
Power Level
Conditions
Brivo B-ACS6100R-E/S
and B-ACS6100L-E/S
Level 1 Level 1 Level 4 Level 1 N/A
Parts and Service
The B-ACS6000-MBE/MBS control panel contains no user serviceable parts. The lithium battery is not serviceable
and is to be replaced by qualied service technicians only.
Documentation Disclaimer and Restrictions
Information in this document is subject to change without notice and does not represent a commitment on the part
of Brivo Systems LLC. For the most up-to-date information, visit www.brivo.com.
This document and the data herein shall not be duplicated, used or disclosed to others for procurement or manu-
facturing, except as authorized with the written permission of Brivo Systems LLC. The information contained within
this document or within the product itself is considered the exclusive property of Brivo Systems LLC. All information
in this document or within the hardware and software product themselves is protected by the copyright and/or
other intellectual property laws of the United States.
Product Support
All support for this product is provided by the third-party dealer. Please contact the dealer who installed the prod-
uct with questions and support requests.
© 2022 Brivo Systems LLC. All rights reserved.
Brivo® is a trademark of Brivo Systems LLC. Brivo Systems LLC., 7700 Old Georgetown Road, Suite 300, Bethesda,
MD 20814