Brivo B-ACS6100L-E - Page 8

© 2022 Brivo Systems LLC. All rights reserved. PUB-Brivo ACS6100 Installation Manual
8
Brivo ACS6100 Installation Manual
• 1 zipper bag
• 16 2k ¼W 5% resistors
• 5 B-ACS6000-MBE style standos
• 5 B-ACS5000-MBE style standos
• 1 dipole antenna – 2dB (Wi-Fi antenna)
• 1 IPEX cable (Wi-Fi cable)
• 1 earth ground screw
• 1 4P power wire harness
• 1 identity label
• 1 cardboard box containing a power supply board (B-ACS6100-PSB) and PSB
accessories.
• 2 power supply boards
• 2 anti-static bubble wrap bags
• 2 power supply board accessories kits
• 1 zipper bag
• 4 screws
• 1 identity label
b) 1 cardboard box containing accessories, including:
• 1 Pre-assembled CAN Bus cable
• 2 AC/DC power adapters
• 2 14Ah lead-acid batteries
c) 1 lock and key set
d) 1 documentation set, including:
• Installation Manual (this document)
3. If additional DOOR BOARDs have been ordered with the control panel, locate and check the contents of
each 2-Door Board (B-ACS6100-DB) Kit. There may be up to 15 of these kits, and each should contain
the following parts:
a) 1 DOOR BOARD
b) 1 anti-static bubble wrap bag
c) 1 DOOR BOARD Accessory Kit
• 1 zipper bag
• 16 2k ¼W resistors
• 1 power wire harness
d) 1 identity label
4. If additional INPUT OUTPUT BOARDs have been ordered with the control panel, locate and check the
contents of each INPUT OUTPUT BOARD (B-ACS6100-IO) Kit. There may be up to 14 of these kits, and each
should contain the following parts.
a) 1 INPUT OUTPUT BOARD
b) 1 anti-static bubble wrap bag
c) 1 INPUT OUTPUT BOARD Accessory Kit
• 1 zipper bag
• 16 2k ¼W resistors
• 1 power wire harness
d) 1 identity label
5. If additional standard expansion chassis have been ordered with the control panel, locate and check the
contents of each standard Expansion Chassis Kit (B-ACS6100R-EXP). Each standard expansion chassis can
hold up to four boards, including any combination of door and/or Input Output boards. Combined, there
may be enough chassis kits to hold 1 MAIN CONTROL BOARD, and any combination of 14 door and/or Input/
Output boards. Each standard expansion chassis (B-ACS6100R-EXP) should contain the following parts:
a) 1 metal chassis
• 1 lid