3–1
3 – INSTALLATION INSPECTION
Before operating unit, be sure installa-
tion meets all requirements in the Instal-
lation Manual provided with your unit.
Follow cleaning instruc-
tions as outlined in this
manual before operating for the first
time. See “Cleaning” on page 9-1.
• A remote circuit breaker or fuse should
be installed in the main power supply
located in a path of exit and clearly iden-
tified.
• To avoid splashing of hot liquid, unit
must be restrained to prevent tipping.
This can be done by installing the unit in
a battery of appliances, in an alcove or
with adequate ties.
•See Safety Relief Valve on page 4-3.
DO NOT install unit where traffic areas
are on either side or behind unit.
2400GH:
Electrical Grounding
Instructions—The Model
2400GH is equipped with a three-prong
(grounding) plug to protect against
shock hazard. The plug must be plugged
directly into a properly grounded three-
prong receptacle. DO NOT cut or remove
the grounding prong from this plug.
• A gas shutoff valve, installed in gas sup-
ply line, should be located in a path of
exit and clearly identified.
Gas Conversion
USA and Canada
• Contact your local Broaster Company
representative for converting from one
type of gas to another.
European Union
• Units manufactured for use in the Euro-
pean Union are not convertible from one
type of gas to another.
broaster.com Manual #15459 5/02 Rev: 6/15
To Next Page
Loading...
