6–4
Activate/Deactivate Auto Comp:
Action: Press and hold the AUTO
COMP button for 3 seconds.
Response: AUTO COMP is enabled
when the AUTO COMP LED is on and
disabled when it is off.
Advance to Next Preset
Action: Press the RESET button once.
Response: The CYCLE COUNT dis-
play changes to “-1” and the presets
for #1 are displayed.
Repeat the process as described. After the
presets for #9 are displayed, pressing the
RESET button again causes the control to
return to normal operation.
broaster.com Manual #15459 5/02 Rev: 9/16
To Next Page
Loading...
