126 Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-03
Regulatory compliance
A
Regulatory compliance
This section describes the regulatory compliance requirements for the Brocade DCX 8510-8. It
contains the following standards:
• “FCC warning (US only)” on page 126
• “KCC statement (Republic of Korea)” on page 127
• “VCCI statement (Japan)” on page 127
• “BSMI statement (Taiwan)” on page 127
• “CE statement” on page 127
• “Canadian requirements” on page 128
• “Laser compliance” on page 128
• “Regulatory compliance standards” on page 128
FCC warning (US only)
This equipment has been tested and complies with the limits for a Class A computing device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
mSFP LC - mSFP LC, duplex,
multi-mode, OM3, 50/125
1 m S5S502S5120001M 106273-0560 943-99866-10001
mSFP LC - mSFP LC, duplex,
multi-mode, OM3, 50/125
2 m S5S502S5120002M 106273-0561 943-99866-10002
mSFP LC - mSFP LC, duplex,
multi-mode, OM3, 50/125
3 m S5S502S5120003M 106273-0562 943-99866-10003
mSFP LC - mSFP LC, duplex,
multi-mode, OM3, 50/125
5 m S5S502S5120005M 106273-0563 943-99866-10005
mSFP LC - mSFP LC, duplex,
multi-mode, OM3, 50/125
10 m S5S502S5120010M 106273-0564 943-99866-10010
Trunk cables - mSFP to MTP tbd
mSFP LC - MTP-female, 12 fiber,
12" breakout, OM3, 50/125
H93S5TE9-BMU-XXXM
(XXX = length)
943-99867-1XXXX
(XXXX = length)
mSFP LC - MTP-female, 12 fiber,
6" breakout, OM3, 50/125
2m 106272-0327
mSFP LC - MTP-female, 24 fiber,
12" breakout, OM3, 50/125
2m 106272-0328
Bag of clips (quantity 64) TRIGGER-BP-NP n/a n/a
TABLE 27 Qualified cables for mSFP connections for the FC8-64 high density port blade
Description Length Corning part number Molex part number Amphenol part number
To Next Page
Loading...
Need help?
General
