76 Brocade FastIron X Series Chassis Hardware Installation Guide
53-1001723-02
Connecting network devices
3
Connecting network devices
Brocade devices support connections to other vendors’ routers, switches, and hubs, as well other
Brocade devices.
Cable specifications
Refer to “Cable specifications” on page 168 for cable lengths and types.
Connecting to Ethernet or fast Ethernet hubs
For copper connections to Ethernet hubs, a 10/100Base-TX or 1000Base-T switch, or another
Brocade device, a crossover cable is required (Figure 36 and Figure 37). If the hub is equipped with
an uplink port, it will require a straight-through cable instead of a crossover cable.
To Next Page
Loading...
Need help?
General
