EasyManua.ls Logo

Broderson IC-40-D - Page 11

Broderson IC-40-D
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-7
Brakes:
Standard:
Primary braking from hydrostatic transmission. Foot-actuated wet-disc brakes in
each axle for additional braking in some conditions. Lever-actuated parking brake
to hold crane when not being driven.
Tires:
Standard:
28x9-15 pneumatic tires, 12 PR. Pressurized to 120 PSI (830 kPa) for crane
rated loads.
Optional Tires:
Foam Filling of Tires:
Standard tires, foam filled to prevent flats. Net Weight: 390 pounds (177 kg)
Solid Non-Marking Tires:
Solid tires, non-marking compound. Not for use on rough concrete surfaces or
off road. Net Weight: 300 pounds (136 kg)
Spare Tire & Wheel:
28x9-15 pneumatic tires, 12-PR. Net Weight: 140 pounds (63 kg)
Chassis:
Standard:
Cargo Deck:
29-square-foot (2.7 m
²) area. A maximum of 6000 pounds (2720 kg) may be
carried on the deck when centered over, or to the rear of the front axle. Nine
stake pockets are provided in deck, and nine, 1-inch (25 mm) diameter pipe
stakes.
Outriggers:
Four hydraulic outriggers with box beam construction. Independent controls for
each. Hydraulic cylinders are equipped with direct connected holding valves.
Pad dimensions are 6 inches (15 cm) by 8 inches (20 cm).
Lifting Rings:
Includes four lift rings. One at each corner of the chassis for attaching and
lifting sling cables.
Front Pulling Eye:
Heavy eye in front bumper provides for attachment of hook block, so main
winch line can be used for pulling loads at or near floor level.
Headlight and Taillight Grilles:
Consists of welded steel protective grilles for headlights and taillights. Easily
removable or swung out of way for replacing bulbs.
Optional Chassis Accessories:
Auxiliary Winch:
Optional worm gear winch mounted behind front bumper, with a single lever
control at the operator’s console. Hydraulic powered to provide bare-drum line
pull of 3000 pounds (1360 kg), at 20 feet-per-minute (6 m/min). Winch drum is
3.5 inches (89 mm) in diameter by 6.2 inches (159 mm) long. The winch
includes 80 feet (24.3 m) of 5/16-inch (7.94mm) wire rope, hook, and four-way
roller guide. Net Weight: 120 pounds (55 kg)

Related product manuals