4
1
11
1 GENERAL WARNINGS
GENERAL WARNINGSGENERAL WARNINGS
GENERAL WARNINGS
The heater installation has to be carried out in accordance with the local and national regulations, including
all regulations referred to national or European standards.
All heaters produced in our company are made controlling all the pieces and trying to protect both the user
and the fitter, to avoid possible accidents. We also recommend to the authorized technical fitters, to pay
special attention on electrical connections every time they carry out an operation, especially at the bare part of
cables, which should never be out of the connections box so that dangerous contacts are avoided.
The installation must be executed by authorized
The installation must be executed by authorizedThe installation must be executed by authorized
The installation must be executed by authorized
personn
personnpersonn
personnel, whose will have to supply
el, whose will have to supplyel, whose will have to supply
el, whose will have to supply
t
tt
the buyer a
he buyer ahe buyer a
he buyer an
n n
n
installation conformity
installation conformity installation conformity
installation conformity declaration,
declaration, declaration,
declaration, to
toto
to
assume full responsibility for the definitive installation and
assume full responsibility for the definitive installation andassume full responsibility for the definitive installation and
assume full responsibility for the definitive installation and
keep the
keep the keep the
keep the
product in working order.
product in working order. product in working order.
product in working order. Bronpi Calefacción S.L. will not
Bronpi Calefacción S.L. will notBronpi Calefacción S.L. will not
Bronpi Calefacción S.L. will not
assume any responsibility
assume any responsibilityassume any responsibility
assume any responsibility
in
in in
in case
case case
case of absence of
of absence of of absence of
of absence of
fulfilment
fulfilmentfulfilment
fulfilment
such precautions.
such precautions.such precautions.
such precautions.
The manufacturer will be exempted of any responsibility opposite to damages caused to third due to incorrect
installation or bad use of the device.
To guarantee an accurate operation of the appliance the components should only be replaced for original
spares by an authorized technician.
The maintenance of the device must be
The maintenance of the device must be The maintenance of the device must be
The maintenance of the device must be carried out
carried outcarried out
carried out
at least once a year, by
at least once a year, by at least once a year, by
at least once a year, by the
the the
the Authorized Technical Service.
Authorized Technical Service.Authorized Technical Service.
Authorized Technical Service.
For a major safety it is necessary to bear in mind:
For a major safety it is necessary to bear in mind:For a major safety it is necessary to bear in mind:
For a major safety it is necessary to bear in mind:
• Don’t touch the heater being barefooted or with humid parts of the body.
• The door of the unit must be closed during the operation.
• It is prohibited to modify the safety devices or regulations of the unit without the authorization
of the manufacturer.
• Avoid the direct contact with the parts of the appliance that tend to reach high temperatures
during the operation.
2
22
2 FUELS
FUELSFUELS
FUELS
WARNING!!!
WARNING!!!WARNING!!!
WARNING!!!
USING A
USING AUSING A
USING A
BAD QUALITY
BAD QUALITYBAD QUALITY
BAD QUALITY
PELLET FUEL OR
PELLET FUEL ORPELLET FUEL OR
PELLET FUEL OR
ANY OTHER MATERIAL DAMAGES THE
ANY OTHER MATERIAL DAMAGES THE ANY OTHER MATERIAL DAMAGES THE
ANY OTHER MATERIAL DAMAGES THE OPERATION OF THE
OPERATION OF THE OPERATION OF THE
OPERATION OF THE
HEATER AND COULD
HEATER AND COULDHEATER AND COULD
HEATER AND COULD
DETERMINE THE EXPIRATION OF THE WARRANTY IN
DETERMINE THE EXPIRATION OF THE WARRANTY IN DETERMINE THE EXPIRATION OF THE WARRANTY IN
DETERMINE THE EXPIRATION OF THE WARRANTY IN ADDITION TO EXEMPTING
ADDITION TO EXEMPTING ADDITION TO EXEMPTING
ADDITION TO EXEMPTING
RESPONSIBILITIES FROM THE MANUFACTURER.
RESPONSIBILITIES FROM THE MANUFACTURER.RESPONSIBILITIES FROM THE MANUFACTURER.
RESPONSIBILITIES FROM THE MANUFACTURER.
Pellet fuel used has to be in accordance with the characteristics described in the norms:
Ö-Norm M 7135
DIN plus 51731
UNI CEN/TS 14961
Bronpi Calefacción recommends using pellet fuel 6 mm in diameter.
•
• •
• PELLET FUEL
PELLET FUEL PELLET FUEL
PELLET FUEL STORAGE
STORAGESTORAGE
STORAGE
To avoid combustion problems it is necessary to preserve the pellet fuel on a dry environment.
•
• •
• PELLET FUEL SUPPLY
PELLET FUEL SUPPLYPELLET FUEL SUPPLY
PELLET FUEL SUPPLY
For supplying the heater, you have to open the hopper lid at the top of the appliance pouring directly into it
the pellet fuel, taking care not overfilling the hopper.
3
33
3 SAFETY DEVICES
SAFETY DEVICESSAFETY DEVICES
SAFETY DEVICES
•
• •
• TURNING ON
TURNING ONTURNING ON
TURNING ON
FAILURE
FAILUREFAILURE
FAILURE
If during the ignition stage the flame does not take place, the appliance will show in the display “no ACC
no ACCno ACC
no ACC”. If
you try to light the machine again, in the display you will read “ATTE
ATTEATTE
ATTE“which means “wait“.
This function serves to remember that, before carrying an ignition out, it is necessary to verify that the burn
pot is completely clear and clean.
• BREAKDOWN O
• BREAKDOWN O• BREAKDOWN O
• BREAKDOWN ON THE WARM AIR
N THE WARM AIR N THE WARM AIR
N THE WARM AIR DISTRIBUTION
DISTRIBUTIONDISTRIBUTION
DISTRIBUTION
FAN
FANFAN
FAN
In case that ventilation stops for any reason, the heater stops automatically, avoiding the overheating (not
included on hydro models).
To Next Page
Loading...