C-7
Model 0254
Section C Serial Communications Protocol
Installation and Operation Manual
X-SE-0254-eng
Part Number: 541B129AAG
September, 2010
C-4 Command Operation
C-4-1 General Commands
These commands are general basic utility types.
C-4-1-1 Command Synchronize
This command string terminates commands that may be presently in
process and resets the command state machine operation to the initial
ready state. It can be sent to instruments in a network to provide command
state machine synchronization.
HOST SEND
<esc>AZ<cr>
RESPONSE - none
C-4-1-2 Menu Command
This command is provided for terminal-oriented use and causes display of
a menu listing the basic available command arguments, make, model,
code version, and object code start vector. The menu does not include
special factory diagnostic and production test commands.
HOST SEND
AZM<cr> Non-network
AZ[yyyyy]M<cr> Network
RESPONSE
<cr><lf><lf><lf><lf><lf><lf><lf><lf><lf><lf><lf><lf><lf><lf><lf><lf>
Brooks Instruments
COMMANDS - Model 0254 V01.03.21 FD00
<cr><lf><lf>
[M] Command Select Menu<cr><lf>
[V] Display Port Values<cr><lf>
[K] Send Measured<cr><lf>
[I] Product Identify<cr><lf>
[P] Program New Values<cr><lf>
[Z] Clear Measured Values<cr><lf>
[F] Batch Control Service<cr><lf>
[B] Blend Control Service
[G] Log Record Service
To Next Page
Loading...
