Brooks 5850S - Page 46

46
Installation and Operation Manual
X-DPT-Profibus-DP-Interface-eng
PN 541-C-068-AAG
November, 2008
ELECTRICAL CONNECTION
K PG11 CABLE GLAND
L 1/2" NPT ADAPTER CONDUIT ENTRY
Z SPECIFY
ENHANCEMENTS
A STANDARD RESPONSE:< 1 SEC (5850/51) < 3 SEC (5853) [1].
B FAST RESPONSE (SPECIFY VALUES .... SEC.) [1]
C LINEAR RAMP (SPECIFY VALUES ....%/SEC.) [1]
D FLOW OUTPUT DAMPING (SPECIFY VALUES .... SEC.) [1]
ENHANCEMENTS
0 UNCALIBRATED
DEDUCT
1 STANDARD CALIBRATION INCLUDED (SEE OPTION C)
2 STORAGE OF MULTIPLE CAL. CURVES; ADD PER AVAILABLE
CALIBRATION GAS
9 SPECIFY
POWER SUPPLY INPUT
B + 24 Vdc = (Standard selection)
Z SPECIFY
AREA CLASSIFICATION
1 SAFE AREA [2D]
2 CERTIFIED FOR USE IN ZONE 2 [2D]
3 UL LISTED (NPT ENTRY) (ONLY MF64)
4 UL RECOGNIZED (PG11 ENTRY) (ONLY MF64)
5 WELDED SENSOR, NO CERT, (NPT ENTRY) (ONLY MF64) [2D]
6 WELDED SENSOR, NO CERT, (PG11 ENTRY) (ONLY MF64) [2D]
9 SPECIFY
MF50S / A C 1 H C 1 B A 0 K C 1 B 2 = TYPICAL MODEL NUMBER