Brose E41230 - Page 12

EN | 12 For your safety // Brose Display Allround E41230
NOTE
Risk of damage!
Improper handling can damage the
Brose Drive System or the individual
components.
» Only have individual components
of the Brose Drive System and
the e-bike replaced with identical
components or other components
expressly approved by Brose or the
e-bike manufacturer. In this way, you
can protect the other components or
your e-bike from possible damage.
» Never open the components
of the Brose Drive System. The
components may be destroyed by
opening, voiding the warranty.
» Do not place the e-bike upside down
on the handlebars and saddle.
» Do not use the control unit as a
handle.
» Do not lift the e-bike by the control
unit.
» Never twist the fixed control unit.
Always loosen the grub screw before
turning the control unit to adjust it.