25
ENGLISH
3
After the installation is completed and
the screen shown below is displayed,
click [Close].
The installation of the printer driver is
completed.
Next, install the P-touch Editor 5.0.
4
Double-click “P-touch Editor 5.0
Installer.mpkg”.
The P-touch Editor 5.0 Installer starts up.
Follow the on-screen instructions.
5
When the installation is completed and
the message “Click Restart to finish
installing the software” is displayed, click
[Restart].
The Macintosh
®
is restarted.
The installation of software is completed.
6
After restarting the computer, connect
your printer to the computer by using the
USB/LAN cable, and then turn on the
printer.
7
For Mac OS
®
X 10.3.9 - 10.4.x
Double-click the drive where Mac OS
®
X
is installed, and click “Applications” -
“Utilities” - “Printer Setup Utility”.
For Mac OS
®
X 10.5.x - 10.6
Click Apple menu - “System Preferences”,
and click “Print & Fax”. Then click to
add your printer.
Note
O If you are connecting the printer to the
Macintosh
®
via a USB hub, it may not be
detected correctly. If so, connect the
printer directly to the USB port on the
Macintosh
®
.
USB port
USB cable
AC adapter socket
AC adapter
LAN port
To Next Page
Loading...
