3. INSTALLATION
BAS-311HN, BAS-326H
21
3-15. Installing the machine head fixing bolt
When transporting the sewing machine, secure the machine head to the table with the machine head fixing bolts.
(1) Plain washers [2 pcs.]
(2) Machine head fixing bolts [2 pcs.]
NOTE:
When operating the sewing machine,
remove the machine head fixing bolts.
3-16. Checking the machine head switch
1. Turn on the power.
2. Check that no error numbers appear.
<If error [E050], [E051] or [E055] is displayed>
If the machine head switch (1) is not turned on, error [E050],
[E051] or [E055] will occur.
Use the screw (2) to adjust the installation position of the
machine head switch as shown in the illustration.
3054B
3570B
To Next Page
Loading...
