Brother bas-311hn - Threading Mode

4. PREPARATION BEFORE SEWING
BAS-311HN, BAS-326H
24
<Threading mode>
Threading mode is safe because the sewing machine will not start even when the foot switch is depressed.
1
Turn on the power.
2
Touch the Thread key on the screen.
• Work clamp will drop.
• The tension discs will open.
3
Threading the thread.
4
Ending threading mode
The display will return to the previous screen.
Touch the OK key on the screen.
• The work clamp will return to where it was before
threading mode was started.
3055B