Brother bas-311hn User Manual

8. LIST OF ERROR CODES
BAS-311HN, BAS-326H
55
Feed mechanism-related errors
Code Cause of error and remedy
E200
X-feed motor home position cannot be detected. Problem with X-feed motor or poor X home position sensor
connection.
Turn off the power, and then check that connectors P17, P21 and P8 on the main P.C. board are properly
connected.
E201
X-feed motor stopped due to a problem.
Turn off the power, and then check if there are any problems in the X-feed direction.
Turn off the power, and then check that connectors P17 and P21 on the main P.C. board are properly connected.
E204
X-feed motor stopped due to a problem during sewing.
Turn off the power, and then check if there are any problems in the X-feed direction.
Turn off the power, and then check that connectors P17 and P21 on the main P.C. board are properly connected.
E205
X-feed motor stopped due to a problem while moving to the sewing start position.
Turn off the power, and then check if there are any problems in the X-feed direction.
Turn off the power, and then check that connectors P17 and P21 on the main P.C. board are properly connected.
E206
X-feed motor stopped due to a problem during test feeding.
Turn off the power, and then check if there are any problems in the X-feed direction.
Turn off the power, and then check that connectors P17 and P21 on the main P.C. board are properly connected.
E210
Y-feed motor home position cannot be detected. Problem with Y-feed motor or poor Y home position sensor
connection.
Turn off the power, and then check that connectors P18, P22 and P8 on the main P.C. board are properly
connected.
E211
Y-feed motor stopped due to a problem.
Turn off the power, and then check if there are any problems in the Y-feed direction.
Turn off the power, and then check that connectors P18 and P22 on the main P.C. board are properly connected.
E214
Y-feed motor stopped due to a problem during sewing.
Turn off the power, and then check if there are any problems in the Y-feed direction.
Turn off the power, and then check that connectors P18 and P22 on the main P.C. board are properly connected.
E215
Y-feed motor stopped due to a problem while moving to the sewing start position.
Turn off the power, and then check if there are any problems in the Y-feed direction.
Turn off the power, and then check that connectors P18 and P22 on the main P.C. board are properly connected.
E216
Y-feed motor stopped due to a problem during test feeding.
Turn off the power, and then check if there are any problems in the Y-feed direction.
Turn off the power, and then check that connectors P18 and P22 on the main P.C. board are properly connected.
E230
Feed motor stopped due to a problem.
Reduce the sewing speed or change the operation settings to the settings for heavy-weight materials.
Ask the place of purchase for details on the setting method.
Work clamp-related errors
Code Cause of error and remedy
E300
Work clamp home position cannot be detected. Problem with work clamp motor or poor work clamp home
position sensor connection.
Turn off the power, and then check that connectors P19, P23 and P8 on the main P.C. board are properly
connected.
E301
Work clamp raised or lowered position cannot be detected.
Turn off the power, and then check if there are any problems in the work clamp vertical direction. Turn off the
power, and then check that connectors P19 and P23 on the main P.C. board are properly connected.

Brother bas-311hn Specifications

General

Brand	Brother
Model	bas-311hn
Category	Sewing Machine
Language	English