Brother DCP-115C User Manual

TROUBLESHOOTING AND ROUTINE MAINTENANCE 6 - 22
Replacing the ink cartridges
Your machine is equipped with an ink dot counter. The ink dot
counter automatically monitors the level of ink in each of the four
cartridges. When the machine detects an ink cartridge is running out
of ink, the machine will notify you with a message on the LCD.
The LCD will inform you which ink cartridge is low or needs replacing.
Be sure to follow the LCD prompts to replace the ink cartridges in the
correct order.
Even though the machine informs you that an ink cartridge is empty,
there will be a small amount of ink remaining in the ink cartridge. It is
necessary to keep some ink in the ink cartridge to prevent air from
drying out and damaging the print head assembly.
1 Lift the scanner cover from the right-hand side of the machine
until it locks securely into the open position.
If one or more ink cartridges are empty, for example Black, the
LCD shows Ink Empty Black and Replace Ink.
2 Pull the ink cartridge hook toward you and remove the ink
cartridge for the colour shown on the LCD.
3 Open the new ink cartridge bag for the colour shown on the
LCD, and then take out the ink cartridge.
Empty
Ink Cartridge
Ink Cartridge
Hook

Brother DCP-115C Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 1200 x 6000 dpi
Interface	USB 2.0
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan
Max. Black Print Speed (ppm)	20 ppm
Max. Color Print Speed (ppm)	15 ppm
Scanner Type	Flatbed
Grayscale Depth	8-bit
Reduction/Enlargement	25% - 400%
Scan Resolution	Optical: Up to 600 x 2400 dpi
Media Types	Envelopes, plain paper, photo paper
Operating System Support	Windows, Mac
Copy Speed Color	11 ppm
Paper Sizes	A4, A5, A6, B5, Letter
Copy Resolution	Up to 1200 x 1200 dpi