Brother DCP-1601

General information
37
1
6.Network (For MFC-1910W, MFC-1911NW and MFC-1916NW) 1
6.Network (MFC-1910W)
Level 2 Level 3 Descriptions 1 Level 4 Descriptions 2 Page
1.WLAN 1.TCP/IP — 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address Enter the IP address.
3.Subnet Mask Enter the Subnet
mask.
4.Gateway Enter the Gateway
address.
5.Node Name Enter the Node
name. (Up to 32
characters)
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server Specifies the IP
address of the
primary or secondary
WINS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Secondary
[000-255].[000-255].
[000-255].[000-255]
The factory settings are shown in Bold with an asterisk.