Dialling and storing numbers (MFC models)
75
6
How to dial 6
You can dial in any of the following ways.
Manual dialling 6
Use the dial pad to enter all the digits of the
telephone or fax number.
Speed dialling 6
Press (Address Book) twice and enter
the two digit Speed Dial number. (See Storing
Speed Dial numbers on page 74.)
If the LCD shows Register Now? when
you enter a Speed Dial number, it means
that a number is not stored there.
Search 6
You can search alphabetically for names you
have stored in the Speed Dial memories.
(See Storing Speed Dial numbers
on page 74.)
a Make sure you are in FAX mode.
b Press (Address Book).
c Press the dial pad key for the first few
letters of the name. (Use the chart on
Entering text on page 61 to help you
enter letters.)
Press OK.
d Press a or b to scroll until you find the
name you are looking for.
Press OK.
e Press Start.
• If you do not enter a letter and press OK in
step c, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
• If the LCD shows No Contact Found
when you enter the first few letters of the
name, it means that a name for the letters
is not stored.
Redial 6
Ensuring the line is not in use, press Redial
to find the last 20 numbers you recently
dialled. Press Redial or a or b to scroll until
you find the number you want to call again.
Press OK and then press Start to send a fax.
Two digit number
To Next Page
Loading...
