Brother DCP-1601

General information
11
1
0.Initial Setup 1
0.Initial Setup (For MFC-1900, MFC-1901 and MFC-1905)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Receive
Mode
— You can choose the
receive mode that
best suits your
needs.
Fax Only* Your machine
automatically
answers every call as
a fax. Fax Only is
displayed on the LCD
when set.
71
Fax/Tel Your machine
controls the line and
automatically
answers every call. If
the call is not a fax,
the phone will ring for
you to pick up the
call. Fax/Tel is
displayed on the LCD
when set.
External TAD
(MFC-1900,
MFC-1901)
Your external
telephone answering
device (TAD)
automatically
answers every call.
Voice messages are
stored on the
external TAD. Fax
messages are
automatically printed.
External TAD is
displayed on the LCD
when set.
Manual You control the
phone line and must
answer every call
yourself. Manual is
displayed on the LCD
when set.
The factory settings are shown in Bold with an asterisk.