Brother DCP-1601

General information
41
1
1.Wired LAN
(Continued)
1.TCP/IP
(Continued)
9.APIPA On*
Off
Automatically
allocates the IP
address from the
linklocal address
range.
0.IPv6 On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://support.brother.com
for more information.
2.Ethernet ——Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Choose the Ethernet
link mode.
3.Wired
Status
——Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
You can see the
current wired network
status.
4.MAC Address Shows the MAC
address of the
machine.
—
5.Set to
Default
Restore the wired
network setting to
factory default.
— 1.Reset
2.Exit
6.Wired
Enable
——On*
Off
Enable or disable the
wired network
manually.
6.Network (MFC-1911NW and MFC-1916NW) (continued)
Level 2 Level 3 Descriptions 1 Level 4 Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.