General information
57
1
1.Wired LAN
(Continued)
4.MAC Address Shows the MAC
address of the
machine.
—
5.Set to
Default
Restore the wired
network setting to
factory default.
— a Reset
b Exit
6.Wired
Enable
——On*
Off
Enable or disable the
Wired network
manually.
2.WLAN 1.TCP/IP — 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address Enter the IP address.
3.Subnet Mask Enter the Subnet
mask.
4.Gateway Enter the Gateway
address.
5.Node Name Enter the Node
name. (Up to 32
characters)
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server Specifies the IP
address of the
primary or secondary
WINS server.
Primary
[000-255].[000-255].
[000-255].[000-255]
Static
[000-255].[000-255].
[000-255].[000-255]
4.Network (DCP-1615NW and DCP-1616NW) (continued)
Level 2 Level 3 Descriptions 1 Level 4 Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
