General information
59
1
2.WLAN
(Continued)
6.WLAN Status — 1.Status You can see the
current wireless
network status.
2.Signal You can see the
current wireless
network signal
strength.
3.SSID You can see the
current SSID.
4.Comm. Mode You can see the
current
Communication
Mode.
7.MAC Address Show the MAC
address of the
machine
8.Set to
Default
Restore the wireless
network settings to
factory default.
a Reset
b Exit
9.WLAN Enable Enable or disable the
wireless network
manually.
On
Off*
3.Network
Reset
— Restore all network
settings to the factory
defaults.
a Reset
b Exit
4.Network (DCP-1615NW and DCP-1616NW) (continued)
Level 2 Level 3 Descriptions 1 Level 4 Descriptions 2 Page
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
