Brother DCP DCP-7030 User Manual

Making copies
27
4
Using the Options key 4
Use the Options key to quickly set the following copy settings temporarily for the next copy.
Improving copy quality 4
You can choose from a range of quality
settings. The default setting is Auto.
 Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
 Text
Suitable for documents containing only
text.
 Photo
Suitable for copying photographs.
To temporarily change the quality setting,
follow the steps below:
a Load your document.
b Enter the number of copies you want.
c Press Options.
Press a or b to choose Quality.
Press OK.
d Press a or b to choose Auto, Photo or
Text.
Press OK.
e Press Start.
Press Menu selections Options Page
Press a or b, then press OK
Press a or b, then press OK
Quality Auto*
Photo
Text
27
(DCP-7040 only)
Stack/Sort
(appears when the document
is in the ADF)
Stack*
Sort
28
Page Layout Off(1 in 1)*
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
28
The factory settings are shown in Bold with an asterisk.

Brother DCP DCP-7030 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution Optical	Up to 600 x 2400 dpi
Scan Resolution Enhanced	Up to 19200 x 19200 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	Up to 10, 000 pages
Functions	Print, Copy, Scan
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed	20 ppm
Copy Speed	20 cpm
Media Type	Labels, Envelopes
Media Size	A4, Letter, Legal, A5, A6