Brother DCP DCP-7030 User Manual

Troubleshooting and routine maintenance
57
B
Document jams
(DCP-7040 only) B
If the document is jammed, follow the steps
below.
Note
After removing a jammed document,
check that no paper scraps are left in the
machine that could cause another jam.
Document is jammed in the top of the
ADF unit
B
a Take out any paper from the ADF that is
not jammed.
b Open the ADF cover.
c Pull the jammed document out to the
left.
d Close the ADF cover.
e Press Stop/Exit.
Document is jammed under the
document cover
B
a Take out any paper from the ADF that is
not jammed.
b Lift the document cover.
c Pull the jammed document out to the
right.
d Close the document cover.
e Press Stop/Exit.
Document is jammed at the output
tray
B
a Pull the jammed document out to the
right.
b Press Stop/Exit.

Brother DCP DCP-7030 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution Optical	Up to 600 x 2400 dpi
Scan Resolution Enhanced	Up to 19200 x 19200 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	Up to 10, 000 pages
Functions	Print, Copy, Scan
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed	20 ppm
Copy Speed	20 cpm
Media Type	Labels, Envelopes
Media Size	A4, Letter, Legal, A5, A6