Making copies
29
4
i After all the pages have been scanned,
press b in h to finish.
(DCP-7040 only) If you are copying
from the ADF:
4
Insert your document face up in the direction
shown below:
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
If you are copying from the scanner
glass:
4
Insert your document face down in the
direction shown below:
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Out of memory
message
4
If the memory becomes full while you are
making copies, the LCD message will guide
you through the next step.
(DCP-7030 only) If you get an
Out of Memory message, press Stop/Exit
to cancel the operation.
(DCP-7040 only) If you get an
Out of Memory message while scanning a
subsequent page, you will have the option to
press Start to copy the pages scanned so far,
or to press Stop/Exit to cancel the operation.
To Next Page
Loading...
