Brother DCP DCP-7030 User Manual

78
Packing and shipping
the machine B
CAUTION
If you pack the machine soon after turning
off the power make sure the machine has
cooled down completely.
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty. The
machine should be adequately insured with
the carrier.
a Turn off the machine’s power switch.
b Unplug all the cables and AC power
cord from the machine.
c Open the front cover.
d Remove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
e Place the drum unit and toner cartridge
assembly into the plastic bag and seal
the bag.
f Close the front cover.
g Wrap the machine in the plastic bag and
place it in the original carton with the
original packing material.
h Pack the drum unit and toner cartridge
assembly, AC cord and printed
materials in the original carton as shown
below:
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your “Exchange” machine.
i Close the carton and tape it shut.

Brother DCP DCP-7030 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution Optical	Up to 600 x 2400 dpi
Scan Resolution Enhanced	Up to 19200 x 19200 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	Up to 10, 000 pages
Functions	Print, Copy, Scan
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed	20 ppm
Copy Speed	20 cpm
Media Type	Labels, Envelopes
Media Size	A4, Letter, Legal, A5, A6