Brother DCP DCP-7030 User Manual

62
e Put the toner cartridge back into the
drum unit until you hear it lock into place.
If you put it in properly, the green lock
lever will lift automatically.
f Put the drum unit and toner cartridge
assembly back in the machine.
g Close the front cover.
Routine maintenance B
WARNING
Use neutral detergents.
DO NOT use cleaning materials that
contain ammonia, alcohol, any type of
spray, or any type of flammable substance
to clean the outside or inside of the
machine. Doing this may cause a fire or
electrical shock. For more infomation see
Important safety instructions on page 42.
CAUTION
The drum unit contains toner, so handle it
carefully. If toner scatters on your hands or
clothes, wipe or wash it off with cold water
at once.
Cleaning the outside of the
machine B
Clean the outside of the machine as
follows:
B
a Turn off the machine’s power switch.
Disconnect all cables, and then unplug
the power cord from the AC power
outlet.

Brother DCP DCP-7030 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution Optical	Up to 600 x 2400 dpi
Scan Resolution Enhanced	Up to 19200 x 19200 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	Up to 10, 000 pages
Functions	Print, Copy, Scan
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed	20 ppm
Copy Speed	20 cpm
Media Type	Labels, Envelopes
Media Size	A4, Letter, Legal, A5, A6