Brother DCP DCP-7030 User Manual

Troubleshooting and routine maintenance
71
B
WARNING
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. When you open the front or
back cover (back output tray) of the
machine, DO NOT touch the shaded parts
shown in the illustration. If you do this, you
may get burned.
a Open the front cover.
b Slowly take out the drum unit and toner
cartridge assembly.
CAUTION
We recommend that you put the drum unit
and toner cartridge assembly on a clean,
flat surface with a piece of disposable paper
or cloth underneath it in case you
accidentally spill or scatter toner.
To prevent damage to the machine caused
by static electricity, DO NOT touch the
electrodes shown in the illustration.
c Push down the green lock lever and take
the used toner cartridge out of the drum
unit.
WARNING
DO NOT put a toner cartridge into a fire. It
could explode, resulting in injuries.

Brother DCP DCP-7030 Specifications

General

Print Technology	Laser
Print Resolution	Up to 2400 x 600 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution Optical	Up to 600 x 2400 dpi
Scan Resolution Enhanced	Up to 19200 x 19200 dpi
Paper Input Capacity	250 sheets
Output Tray Capacity	100 sheets
Connectivity	USB 2.0
Monthly Duty Cycle	Up to 10, 000 pages
Functions	Print, Copy, Scan
Operating Systems Supported	Windows, Mac OS, Linux
Print Speed	20 ppm
Copy Speed	20 cpm
Media Type	Labels, Envelopes
Media Size	A4, Letter, Legal, A5, A6