Brother GTX-4 - Page 137

137
Basic printing procedures
For coating with a pretreatment roller (option)
<TIPS>
 For details of the item code, refer to "10-4. About consumable supplies, optional items and replacement parts >>P.319".
(1) Make a polypropylene tray or the like, handle (handgrip for roller), weighing instrument to measure the amount of
coating and agent-coating table ready for use.
<TIPS>
 It is convenient for you to use an agent-coating table that can cover the print area, because it prevents the pretreatment
from soaking into the underside of the area.
X008
6
(2) Weigh a T-shirt before applying the pretreatment to it, so that you will be able to know how much of the agent you
have applied to it later.
X008
7
(3) Slide a T-shirt onto the agent-coating table, with its printing side facing upward.
<TIPS>
 Note that pretreatment agent will not soak into the back (reverse) side of a T-shirt if you put an intermediate plate inside the
T-shirt when there is not an agent-coating table.
X008
8
Tray
Weighing instrument
Agent-coating table
Handle (handgrip of roller)
Agent-coating table
T-shirt
T-shirt
Weighing instrument