Brother GTX-4 - 6-6-3. Sending Print Data from Other Applications

161
Basic printing procedures
6-6-3. Sending print data from other applications
CorelDRAW
(1) In the menu bar, select [File] > [Print].
(2) Open the [Color] tab, and make the following settings:
 Place a checkmark in the [Use document color settings] checkbox.
 [Color conversions performed by]: "Brother GTX-4" or "Brother GTX-4 FileOutput"
 [Correct colors using color profile]: [sRGB IEC61966-2.1]
 [Rendering intent]: [Relative colorimetric]
(3) Open [General] tab and select "Brother GTX-4" from [Printer].
<TIPS>
 If the specified [Printer] is set to "Brother GTX-4", the print data will be sent to the printer.
If the specified [Printer] is set to "Brother GTX-4 FileOutput", the print data will be saved as an ARX4 file.
(4) On [Preferences], set up the printer driver and send the print data by clicking [OK] in the [Print] dialog box.
<TIPS>
 For details, refer to "5-5. Printer driver's setting from other applications >>P.105".
 Clicking on [OK] will not start the print operation of the printer itself. The print button of the printer should be pressed to start
the printing operation.