Brother GTX-4 - 8-17. Language Setting; 8-18. Display of Version

233
What to do when needed
8-17. Language setting
Select your desired language to be shown on the liquid crystal panel.
(1)
From the menu, select [Language], and press
.
(2)
Select your desired language in the [Language] window, and finalize your setting by pressing
.
(3)
Follow the on-screen message, and turn off the power and on again.
8-18. Display of version
On this display screen, the firmware's version information, [Firm Version], as well as [Data Info] and [Serial No.], are
shown.
(1)
From the menu, select [Version], and press
.
(2)
In the window shown below, select one of the [Firm Version], [Data Info] and [Serial No.], and press
.
(3)
Then, one of the [Firm Version], [Data Info] and [Serial No.] will appear.
<TIPS>

Pressing the
button causes the currently displayed window to go back to the [Version] window.
 The display screen shown here has been taken as an example.