Brother GTX-4 - 8-5. Print Operation Settings Under Low Temperature; 8-6. Screen Back Light Adjustment

227
What to do when needed
8-5. Print Operation Settings Under Low Temperature
Configure the printer with automatic switching to low temperature operation mode for ensuring print quality when [Temp
Low] is displayed on the liquid crystal panel. It is set to [Enable(Normal)], by default.
If the low temperature operation mode is enabled, the printer will automatically be switched to the low temperature
operation. Although it can assure print quality, it may take longer time for printing.
If the low temperature operation mode is disabled, print speed will not slow down; however, poor ejection may occur.
(1)
From the menu, select [Printer Setting] > [Low Temperature Mode], and press
.
(2)
Select the print mode under low temperature and press
.
<TIPS>
 When [Disable] is selected, white ink injection may become unstable when trying to print a wide area.
8-6. Screen back light adjustment
(1)
From the menu, select [Printer Setting] > [Back Light], and press
.
(2)
Select your desired brightness of Liquid crystal panel, and press
.
<TIPS>
 During this menu selection process, the screen is displayed with the selected brightness.