Brother GTX-4 - 9-2-8. Re-install the Ink

287
Troubleshooting
9-2-8. Re-install the ink
Ink should be re-installed when an entrance of air into the print head prevents proper ink-jet operation and remedial
measure cannot improve the condition.
(1)
While the printer is in standby mode, press
on the operation panel to bring the menu screen into view.
(2)
Press
, select [Maintenance] > [Initial Ink Installation], and press .
(3)
Press
to select one of the options; [All Colors], [All Whites], [All Print Heads], [Black], [Yellow Cyan
Magenta], [White-1], or [White-2-4], and press
.
(4)
According to the message displayed on the operation panel, press
.
Initial ink installation will be operated.
<TIPS>
 Estimated time to complete the process is; 15 minutes for [White-1] and [White-2-4], and 10 minutes for [Black] and [Yellow
Cyan Magenta]. After the procedures are completed, the current screen will go back to the standby mode screen.