Brother GTX-4 - 7-1-6. Replacing the Fan Filter

196
Precautions to keep good printing quality/use printer over the long term
7-1-6. Replacing the fan filter
When a warning message appears in the warning message window, replace the fan filter with a new one.
(1) Make the gloves which come standard with the printer, as well as a new fan filter, available for use.
(2)
From the menu, select [Maintenance] > [Maintenance Part Clean/Replace], and press
.
<IMPORTANT>
 If any other error or message is displayed on the operation panel or warning message window, follow the message to solve
the problem, then perform the cleaning.
<TIPS>

Pressing
causes the platen to start moving. Do not put anything around the platen.
(3) Follow the on-screen message and turn off the power.
(4) Remove the fan filter from the main unit of printer.
<NOTE>
 For a proper work operation, be sure to wear the printer-provided gloves.
X0061
Fan filter