Brother GTX-4 - Page 163

163
Basic printing procedures
Adobe Illustrator
(1) In the menu bar, select [File] > [Print] > [Color Management].
(2) Make the settings as follows:
 [Document Profile]: [sRGB IEC61966-2.1]
 [Color Handling]: [Let Illustrator determine colors]
 [Printer Profile]: [sRGB IEC61966-2.1]
 [Rendering Intent]: [Relative Colorimetric]
(3) From [Printer], select "Brother GTX-4".
<TIPS>
 If [Printer] is set to "Brother GTX-4", the print data will be sent to the printer.
If [Printer] is set to "Brother GTX-4 FileOutput", the print data will be saved as an ARX4 file.
(4) In the [Advanced], set up the printer driver, and send the print data by clicking [Print].
<TIPS>
 For setting details, refer to "5-5. Printer driver's setting from other applications >>P.105".
 Clicking on [Print] will not start the print operation of the printer itself. The print button of the printer should be pressed to
start the printing operation.