Brother GTX-4 - Page 178

178
Precautions to keep good printing quality/use printer over the long term
(4) Open the front cover, and clean each of the nozzle guards, wipers, exhaust caps, and suction caps.
<TIPS>
 For the cleaning method, refer to the description mentioned below.
X007
6
(5) After the cleaning is completed, close the front cover.
(6) Turn on the power.
<NOTE>
 Dispose of any waste resulting from the cleaning in accordance with applicable laws and ordinances.
<TIPS>
 Then, a head cleaning will be performed to prevent any ink from drying up.
 Because the cleaning cup will be reused, rinse it in clean cleaning solution and store it in a safe place.
Front cover
Exhaust cap
Wiper
Exhaust cap
Wiper
On the white side
On the color side
Nozzle guard
suction cap
suction cap