Brother GTX-4 - Page 270

270
Troubleshooting
Replacement procedures for print head on the white side
<IMPORTANT>
 When you replace a print head on the white side, you need a capping pouch (optionally available) in addition to a print head.
Instead of the capping pouch, a white ink pouch at its empty level before its expiry date can also be used. A capping pouch or a
white ink pouch at its empty level should be ready for use.
(1)
From the menu, select [Maintenance] > [Head Replacement] > [White], and press
.
<IMPORTANT>
 Instead of the capping pouch, a white ink pouch at its empty level before its expiry date can also be used. A capping pouch
or a white ink pouch at its empty level should be ready for use.
<TIPS>
 Perform the work operation by following the on-screen instructions.

Pressing
causes the platen to start moving. Do not put anything around the platen.
(2) Remove the white ink cartridge from the printer.
<TIPS>
 The bottom of the cartridge may be soiled with ink.
W12 W34
X0039
(3) Open the cartridge's lid.
<IMPORTANT>
 When opening the lid, be sure not to touch the portion (a). Otherwise, it could be damaged.
 Place the entire cartridge on a flat surface, push the latches on the bottom surface of the cartridge downward and open the
lid.
(a)
X0042
White Ink Cartridge
Lid
Cartridge
Latch Lid