Brother GTX-4 - Page 292

292
Troubleshooting
Error code Error message Description Remedy
2085
[White 34 Check The
Cartridge]
The white 34 ink pouch may
not be winded properly.
Take out the white 34 cartridge, open the cover,
and have the ink pouch winded properly. Close the
cover, set the ink pouch back to the printer, and
press
to clear the error.
2090 [Ink Pouch Error Black]
An error has been detected in
the black ink pouch.
In that case, replace with a new ink pouch set.
2091
[Ink Pouch Error
Magenta]
An error has been detected in
the magenta ink pouch.
In that case, replace with a new ink pouch set.
2092 [Ink Pouch Error Cyan]
An error has been detected in
the cyan ink pouch.
In that case, replace with a new ink pouch set.
2093 [Ink Pouch Error Yellow]
An error has been detected in
the yellow ink pouch.
In that case, replace with a new ink pouch set.
2094
[Ink Pouch Error White
12]
An error has been detected in
the white 12 ink pouch.
In that case, replace with a new ink pouch set.
2095
[Ink Pouch Error White
34]
An error has been detected in
the white 34 ink pouch.
In that case, replace with a new ink pouch set.
2100
[USB flash drive Not
Ready]
No USB flash memory been
inserted into its insertion slot.
Insert a USB flash memory into the slot, wait for a
couple of seconds, and perform the operation.
Insert a USB flash memory into the slot again.
If the problem still persists, check on the format
and type of the USB flash memory.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
2101 [Not Enough Area]
At the writing stage to the
USB flash memory there is
not enough free space to
store the data.
Use your PC to check free space on the USB flash
memory.
Insert the USB flash memory that has enough free
space into the insertion slot.
2105 [No Files]
No valid file exists in a USB
flash memory.
Connect the USB flash memory to your PC for
checking the information stored in it.
If the ARX4 file has been saved to it, check its
content by means of the file viewer.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
2110
[Receiving History W/O
Error1]
After the power is turned on, it
is found that there is no print
data received.
Press
to clear the error.
2120
[Print Data Auto Delete
Enable]
Because the Print Data Auto
Delete Enable function
remains active, no receiving
history is available.
Press
to clear the error.
When you use the receiving history, disable the
Auto Job Delete option.
2130
[White Ink Pause Mode…
Non-performable]
Because the White Ink Pause
Mode remains active, no
white ink can be installed.
Press
to clear the error.
When you use the white ink, do not make the
White Ink Pause Mode active.