68
Creating print data
No. Name Function
3 Vertical Position
With the uppermost part of Platen Frame set to 0, this function enables you to
display and change the vertical position of an object.
When you drag the object to move it elsewhere, the corresponding value
changes accordingly.
4 Image Width
By specifying the width, you can change the image size.
When you change the image height, the corresponding value changes
accordingly.
The maximum value is 32 inch, and the minimum value is 0.5 inch.
A unit for the values is the one specified by the Details button.
5 Image Height
By specifying the height, you can change the image size.
When you change the image width, the corresponding value changes
accordingly.
The maximum value is 36 inch, and the minimum value is 0.5 inch.
A unit for the values is the one specified by the Details button.
6 Centering
This function positions an object at the center of the platen grid in both vertical
and horizontal directions.
7 Vertical Centering
This function positions an object at the center of the platen grid in a vertical
direction.
8 Horizontal Centering
This function positions an object at the center of the platen grid in a horizontal
direction.
9 Bring to the Front
It brings an object to the front.
Among those objects that overlap with the selected object, this function moves
one object to the foremost position in front of the object which is currently
positioned at the front side. However, no change will take place if no object
overlaps with each other.
10 Send to the Back
Send an object to the bottom/back of the overall image.
Among objects that overlap with the selected object, this function moves one
object to the bottommost position behind the object which is currently
positioned at the rearmost of the overall image. However, no change will take
place if no object overlaps with each other.
11 Delete Click on the recycle bin icon to delete any object.
To Next Page
Loading...
