Brother GTX-4 - Page 87

87
Creating print data
(2) Open the [Color] tab, and make the following settings:
 Place a checkmark in the [Use document color settings] checkbox.
 [Color conversions performed by]: "Brother GTX-4" or "Brother GTX-4 FileOutput"
 [Correct colors using color profile]: [sRGB IEC61966-2.1]
 [Rendering intent]: [Relative colorimetric]
(3) On [General] tab, select [Printer] and select "Brother GTX-4 FileOutput" for file output.
<TIPS>
 If the specified [Printer] is set to "Brother GTX-4", the print data will be sent to the printer.
If the specified [Printer] is set to "Brother GTX-4 FileOutput", the print data will be saved as an ARX4 file.
(4) On [Preferences], create your settings of printer driver.
<TIPS>
 For details, refer to "5-5. Printer driver's setting from other applications >>P.105".