Brother HL-L9300CDW - Page 265

3-124
Confidential
(14) Remove the Taptite cup S M3x6 SR screw and remove the LT solenoid holder ASSY from
the LT frame L unit.
(15) Remove the Gear 46 from the LT frame L unit.
Fig. 3-176
(16) Turn the LT frame L unit upside down.
(17) Remove the two Taptite cup S M3x6 SR screws from the LT beam front.
Fig. 3-177
LT frame L unit
Gear 46
Taptite cup S M3x6 SR
15
14
LT solenoid holder ASSY
<Left side>
Taptite cup S M3x6 SR
LT beam front
<Left side>