5-33
Confidential
■ Printing of misregistration correction chart
<Operating procedure>
■ Misregistration correction chart
Fig. 5-10
Model without touch panel Model with touch panel
(1) Press the or key to display
“MAINTENANCE 66” on the LCD in the
initial state of the maintenance mode.
Then, press the OK key.
“REGISTRATION” is displayed on the
LCD.
(2) Press the or key to display
“PRINT CHART” on the LCD.
(3) Press the Go key. “PRINTING” is
displayed on the LCD, and
misregistration correction chart (see the
figure below) is printed. When printing
is finished, “PRINT CHART” is
displayed on the LCD.
(4) Press the Cancel key to return the
machine to the initial state of the
maintenance mode.
(1) Press the 6 key twice in the initial state
of the maintenance mode.
“REGISTRATION” is displayed on the
LCD.
(2) Press the or key to display
“PRINT CHART” on the LCD.
(3) Press the SET key. “PRINTING” is
displayed on the LCD, and
misregistration correction chart (see the
figure below) is printed. When printing
is finished, “PRINT CHART” is
displayed on the LCD.
(4) Press the X key to return the machine
to the initial state of the maintenance
mode.
To Next Page
Loading...
