2-34
Confidential
Maintenance Replace Fuser
Number of used pages for the
fuser unit has reached the upper
limit.
4500 2-50
Replace Laser
Number of pages printed with the
laser unit has reached the upper
limit.
4600 2-50
Replace PF Kit 1
Number of used pages for the PF
kit 1 has reached the upper limit.
5002 2-54
Replace PF Kit 2
Number of used pages for the PF
kit 2 has reached the upper limit.
5003 2-54
Replace PF Kit 3
Number of used pages for the PF
kit 3 has reached the upper limit.
5004 2-55
Replace PF Kit MP
Number of used pages for the PF
kit MP has reached the upper
limit.
5001 2-54
No Belt Unit Open the Front
Cover, pull out the
Drum Units
completely and
install the Belt Unit.
The registration mark sensor
detected that no belt unit was set.
6400 2-58
No Drum
Unit
Install the Drum
Unit.
The current value between the
CHG and GRID terminals and the
toner sensor detected that there
were no toner cartridges of any
colors and detected that the drum
unit was not set.
6200 2-56
No HUB
Support
No HUB Support.
USB HOST HUB connection
error
--- 4.11.2
No Paper -
When paper was fed from the MP
tray, the MP paper empty sensor
detected that no paper was in the
MP tray.
9301 2-72
For printing specifying Auto, it
was detected that no paper was
loaded in any of the paper trays.
9306 2-74
No Paper T1 -
When paper was fed from the
paper tray 1, the T1 paper feed
sensor detected that no paper
was in the paper tray 1.
9302 2-72
No Paper T2 -
When paper was fed from the T2
paper tray unit, the T2 paper feed
sensor detected that no paper
was in the T2 paper tray unit.
9303 2-73
Error Message
State
Error
Codes
Refer
to:
Upper line Middle line
To Next Page
Loading...
