Brother MFC-250C - How to Set a New Default for Scan to E-Mail (E-Mail Server, MFC-6490 CW Only)

Network Scanning (For models with built-in network support)
105
4
How to set a new default for Scan to E-mail
(E-mail Server, MFC-6490CW only) 4
You can set your own default settings.
Setting the new default 4
a Press the (Scan) key.
b Press a or b to choose Scan to E-mail .
Press OK.
c Press a or b to choose E-mail Server.
Press OK.
d Press and choose your new setting. Repeat this step for each setting you want to change.
e After changing the last setting, press a or b to choose Set New Default.
Press OK.
f Press 1 to choose Yes.
g Press Stop/Exit.
Factory reset 4
You can reset the factory settings.
a Press the (Scan) key.
b Press a or b to choose Scan to E-mail .
Press OK.
c Press a or b to choose E-mail Server.
Press OK.
d Press a or b to choose Factory Reset.
Press OK.
e Press 1 to choose Yes.
f Press Stop/Exit.