Scanning
48
2
Scanning a document using the WIA driver
(For Windows Photo Gallery and Windows Fax and Scan
users)
2
Scanning a document into the PC 2
There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the
Flatbed scanner glass.
If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using
the scanner glass (Flatbed). (See Pre-Scanning and cropping a portion using the scanner glass on page 50.)
a Load your document.
b Open your software application to scan the document.
c Do one of the following:
For Windows Photo Gallery
Click File, then Import from Camera or Scanner.
For Windows Fax and Scan
Click File, New, then Scan.
d Choose the scanner you want to use.
e Click Import.
The Scan dialog box appears.
To Next Page
Loading...
