Brother MFC-250C - Scan to OCR

Scanning
170
10
Scan to OCR 10
If your document is text, you can have it converted by Presto!
®
PageManager
®
to an editable text file and
then have the result displayed in your word processing application for viewing and editing.
a Load your document.
b Press the (Scan) key.
c Press a or b to choose Scan to OCR.
Press OK.
d Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models
10
a Load your document.
b Press the (Scan) key.
c Press Scan to OCR.
d Press Black Start or Color Start.
The machine starts the scanning process.
Note
• You must have Presto!
®
PageManager
®
installed on your Macintosh
®
for the OCR feature to work from
the Scan key or ControlCenter2. (See Using Presto!
®
PageManager
®
on page 179.)
• You can’t choose color Scan type for this function. Black Start or Color Start do not change the settings.