Brother MFC-250C - Scan to FTP Setup on Macintosh

Network Scanning (For models with built-in network support)
203
12
For Touchscreen models 12
a Load your document.
b Press the (Scan) key.
c Press Scan to E-mail.
d Press a or b to display the destination Macintosh
®
you want to use for E-mailing your document.
e Press the destination Macintosh
®
and then press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
Macintosh
®
on the control panel.
Press OK.
f Press Black Start or Color Start.
The machine starts the scanning process.
Note
• If you want to change between color and black and white scanning, choose color or black and white in the
scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See SCAN
on page 184.)
• Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change
the settings.